How to Dye Wooden Beads

How to Dye Wooden BeadsOkay, so I’ve shown you how to paint wooden beads before, but did you know that you can dye them too?! I’ve been playing around with dye and wood since this project and I think these beads are my favorite results yet. It’s such a low maintenance project that anyone can do and the outcome is so colorful and fun! Here’s how:

Time: 20 minutes – 1 hour depending on color results you want
Materials: wooden beads, liquid Rit dye, bowl, water, floral wire (optional)

How to Dye Wooden BeadsLiquid dye is always my favorite to use. Feel free to mix colors to create your own custom results!

How to Dye Wooden BeadsThe ratio of hot water to dye depends on how many beads you want to dye and how many colors. I worked in small containers to make a series of colors, so I used about 5 oz of water to 2 tbs of dye. You can always add more dye if you don’t like the results you’re getting.

Because the beads float, you will either want to be by the dye, turning the beads every now and then, or you can weigh them down by stringing them on floral wire.

One of my favorite aspects of this process is that the results are organic and are different every time. There’s no hard and fast rule for getting great results, so have fun and don’t be scared to experiment a bit. At one point I only have submerged a bead in the dye and I just love the dipped looked. Overall I left my beads in the dye mixture for about 30 minutes.

How to Dye Wooden BeadsOnce you’re happy with the color of your beads (keep in mind they will be darker when wet), rinse in cold water until the water runs clear. Let dry and then you’re ready to craft something colorful! These would make just the cutest necklace for summer don’t you think?

How to Dye Wooden Beads

How to Dye Wooden Beads

How To Make Cardboard Beads

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!Anndddd I’m back! I made it to the east coast (not entirely to Philly yet), and am so ready to get back to crafting. There’s only so long a girl can be separated from her glue gun, am I right?

Since moving is costing me an arm and a leg, I needed to find a way to make some new jewelry for the holiday season without breaking the bank. The good news is that it’s totally possible! Cardboard beads are surprisingly easy to make and a great way to add a pop of color to any outfit. Here’s how:

Time: 20 minutes
Materials: corrugated cardboard, scissors, mod podge, brush, pen, straws

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!This is my first time working with corrugated cardboard and I think I may have a new favorite craft supply. It holds shape nicely and is so easy and flexible to work with. If you’ve never worked with it before, I recommend that you pick some up asap and try this project!

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!If you’re making the triangle shape, it helps to draw it on the back of the cardboard first. You can also make a variety of other shapes by cutting straight strips of paper in a mix of widths. Experiment and have fun with this step!

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!Once you have your shapes cut out, apply a layer of mod podge to the back (smooth side) of the cardboard. Roll up the cardboard on your straw and add bit of mod podge to the end to hold in place. In about 20 seconds you’ll be able to remove your bead from the straw so you can set it aside and let it dry. I found that if you have a few different straws, you can lay them over a cup (so the bead is over the hole) to let dry while you make another bead.

And that’s it! I strung some on a piece of twine and made a fun necklace in no time at all. I think it would be fun to make bigger beads, and maybe have multiple strands, to make a killer statement necklace. I’ve got lost of experimenting to do! What do you think, will you be joining me?!

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!

 

Learn to make a killer statement necklace in 20 minutes using only cardboard and glue!

How to Paint Wooden Beads

How to Paint Wooden BeadsAfter sharing the recap of my bead decorating workshop yesterday, I thought it was only fair to share some tips and tricks with those of you who couldn’t make it!

How to Paint Wooden Beads

What you’ll need:

Acrylic Paint + Brush
Skewers
Wooden Beads
Tape

How to Paint Wooden BeadsWrap a bit of tape about 2-3″ down on your skewer. If your beads are larger than that, position the tape lower on your skewer; you should have skewer visible from the top of the bead. I’ve found that it works best when you wrap the tape a few times around and then wind it down the skewer, that way the bead fits snuggly over the tape rather than resting on top.

Paint with acrylic paint. You will most likely have to give your beads a second coat. To dry, place skewers in a glass! Be sure not to overcrowd your cup so that the beads don’t touch while they’re still wet.

How to Paint Wooden BeadsYou can either leave as is when you dry, or then seal them with a layer of ModPodge. If you want your beads to last without scuffing, I recommend sealing them.

Remove from skewer when completely dry and do with as you please! I love making wooden bead necklaces because the possibilities are essentially endless, not to mention it’s so much cheaper than buying something new. You can also make really cute keychains, like this one Becky made!

How to Paint Wooden BeadsSo fun don’t you think?! You can also rearrange your beads at anytime, making it super easy to mix them up depending on your outfit or the occasion.How to Paint Wooden Beads